What sizes are included?

There are 12 sizes included, from 3"–10" (all approximate). You get every size in the download, so you can stitch the same design on a pocket or across a back.

How many stitches and colours is this design?

44,204 stitches at the 7" size and 3 thread colours. There are 3 colour changes in the stitch order, so that is how many times you will swap thread.

How much thread will I need?

At the largest stitched size this design uses roughly 791 ft top thread · 296 ft bobbin. Smaller sizes use proportionally less. Treat it as a guide for topping up a colour before you start, not an exact figure.

What stabiliser and fabric should I use?

This is a dense design at roughly 1,267 stitches per square inch. Cut-away stabiliser is the safe choice. Best on stable, heavier fabrics — cotton twill, denim, fleece, sweatshirting.

Is this a patch or a finished item?

No. This is a digital embroidery design — a set of machine files you download. It is not a patch, a transfer, or any physical item, and nothing is posted to you. You will need an embroidery machine and a way to transfer the files to it.

How do I receive my files?

Instantly. Your download appears on the confirmation screen the moment payment clears, is emailed to you, and is saved in your account library so you can re-download it at any time.

Can I use this commercially?

Yes — choose the Small business or Extended commercial licence to sell finished items you stitch. The Personal licence covers gifts and items you keep.

UVU embroidery design - Utah Valley Wolverines logo

In the download

What's included

Sizes: 12 sizes · 3"–10" (approx)
Formats: DSB · DST · EXP · HUS · JEF · JEF+ · PCS · PEC · PES · SEW · VIP · VP3 · XXX
Stitch count (at the 7" size): 44,204
Colour changes: 3
Thread needed: 791 ft top thread · 296 ft bobbin
Density: Dense · 1,267 stitches/in² · Cut-away stabiliser
Delivery: Instant download after payment
Re-downloads: Unlimited — saved in your library forever
Colours: 3 thread colours: Thread 16, Thread 18, Thread 17

This is a digital design, not a patch. You are buying machine-embroidery files to download — nothing is posted to you. You will need an embroidery machine and a way to transfer the files to it.

The detail

Description

Bring varsity edge to your stitching with this Utah Valley Wolverines logo, built around a sharp wolverine head layered over the UVU initials. The green, white and grey palette keeps the look true to a modern college sports mark, with the animal face adding bite without losing the clean block lettering underneath. It suits Utah Valley University supporters who want a recognisable team-style emblem rather than a fussy decorative crest.

This is the kind of design that looks right on a hoodie chest, a sweatshirt sleeve, a jacket back yoke or the front of a sturdy tote. With just 3 thread colours, the finish stays bold and readable, while the dense stitching gives the outlined logo a solid, filled-in presence. It will show best on stable fabrics that can carry a heavily stitched sports logo cleanly, especially twill, denim, canvas and sweatshirt fleece.

Good to know

FAQs

This design downloads with DSB, DST, EXP, HUS, JEF, JEF+, PCS, PEC, PES, SEW, VIP, VP3 and XXX. Between them those formats cover Baby Lock, Barudan, Bernina, Brother, Compucon, Elna, Husqvarna Viking, Janome, Melco, Pfaff, Ricoma, Singer, Tajima and Toyota machines. Choose the format your machine reads and load it as you would any other design.